Introduction How To Fix Brother Printer Error 35?
Brother Printer Error 35 is a common error that can easily be fixed by following some simple solutions. This error occurs when you try to print something from your Brother Printer, and it gives an error message saying that your printer is not connected to the computer. Sure enough, your printer is connected but it still won’t print anything.
You are thinking about what could be wrong with your device at this point because there are no other issues with it so far. There could be many reasons for getting this error but among them all, the most common ones include “unclean” print head of the printer and damaged or outdated driver of Brother Printer.
This error is mostly caused by the “unclean” print head of the printer.
The Brother Printer Error 35 is a common error that happens to almost all printers. It is mostly caused by the “unclean” print head of the printer. The print head is part of your printer that applies ink to paper and if it’s dirty, it will not apply ink properly. You can clean your printer’s print head with a cotton swab or damp cloth (not wet). If you want something more thorough, then you can also use a cleaning cartridge
It may also be caused by a faulty or defective cable connection between the printer and the computer.
To troubleshoot this issue, check the printer cable for any damage. Look for any missing pins on the cable or loose connections on the cable. Also check for kinks in the cable and signs of wear and tear on it.
A damaged or outdated Brother Printer driver can also cause this error to occur.
A Brother Printer driver is the software that tells your computer how to communicate with your printer. If you have a new printer, you will need to install the latest driver. If you have an old printer and it’s not being used much or if you want to upgrade it, then it may be time to update the drivers.
You can fix this error by following some simple solutions.
You can fix this error by following some simple solutions.
- Clean the print head. If you have not cleaned the print head of your Brother printer for a long time, then it is probably clogged with dirt and dust. This can cause some problems in printing such as an ink drop in one place or smudged prints.
- To get rid of this problem, clean the print head regularly using a soft cloth dampened with water. You will have to run a cleaning cycle on Brother printers that have this feature so that all ink residue is removed from inside each chamber of the nozzle head assembly. Also make sure that there are no dried up cartridges left before running any cleaning cycle because they may also contribute to poor quality printing if left unused for too long.
- Restart your printer: Sometimes all you need to do to resolve issues like this one is restarting your printer which will clear up any temporary glitches in its system settings.* Reinstall driver: You might also want it run through re-installing its driver or software package so that everything works smoothly again.
- * Replace USB cable: Check if there’s something wrong with your USB cable
- Maybe it’s bent at an angle or has been pulled out too many times
- Before trying anything else; replacing them costs just $10-$20 dollars on average so don’t waste money buying new ones when old ones can be fixed easily.
Solution 1: Cleaning the Print Head
The first thing you should try is cleaning the print head. If there is any ink or toner clogging up the nozzle, it could cause this error code to appear. To clean the print head, follow the instructions given in your Brother printer’s manual. If you do not have a copy of your manual handy, or if it does not give any directions for cleaning a specific error code (like Error 35), then here are some general guidelines:
- Cleaning with cotton swabs: Use cotton swabs dipped in rubbing alcohol to clean away dried ink from around nozzles and other parts of your printer that may be blocked by dried ink. If possible, don’t use anything but plain cotton swabs without any plastic tips because these can scratch parts of your machine! Make sure to place each used swab on a paper towel so they do not get restained by other things that may be on hand when using them (iPhones and other electronic devices often have oils that can end up staining things like paper towels). Once done using all four cotton swabs dip them back into their container filled with water again so they’re ready for next time!
Solution 2: Restarting your device
To restart your printer or computer, follow these steps:
- Restart the printer. To do this, press and hold down the power button for at least five seconds. When the screen goes blank and then turns off again, release the power button and wait for about 30 seconds. Then press it again to turn on your Brother device; you should see a display with a flashing green light next to an icon of five horizontal bars (this signifies that it’s in “sleep mode”).
- Restart your computer if necessary. If you’re using Windows, open Control Panel > Hardware > Device Manager > Printers & Scanners > right-click Connected Devices and select Scanner Properties Center (or Scanner Configuration). If you’re using Mac OS X 10.5+ or later versions (10), go to System Preferences > Print & Scan > right-click attached devices under AppleTalk Printer/Scanner Services section and select Open Print Queue window where one can change various settings related to printing such as printer name/make etc.
Maybe You Need Solution: How to connect Brother printer to iPhone?
Solution 3: Reinstalling the printer driver
If the problem is not solved by following the above solutions, you can try reinstalling the printer driver. You can reinstall the printer driver by following these steps:
- Download and install the latest version of Brother Printer Driver on your computer from official website
- Uninstall all existing printers drivers on your computer and then uninstall any software that comes with it (e.g., Mac OS X 10.x -> System Preferences -> Print & Fax -> [your printer model] -> Remove)
- Reboot your computer to make sure that its new hardware configuration has been applied successfully
Solution 4: Replacing USB Cable
Sometimes, the problem can be traced to a faulty USB cable. To be sure, you’ll need to replace it with a new one from your local computer store.
If that doesn’t work, try downloading the latest driver for your printer and reinstalling it on your computer. If that doesn’t fix things either, contact the manufacturer for further assistance
Conclusion
Brother Printer Error 35 is a common problem when the print head nozzles are clogged. To fix this problem, you need to clean the print head of your Brother printer. This can be a little scary at first as it can be difficult to reach inside the machine and access the printer head.
All Brother printer error messages come in numeric form, and you can easily identify what they mean. If the error message is “35”, the problem is related to a paper jam. If your printer shows a jam error, and you cannot clear the paper jam by restarting the printer or removing it manually, you may need to perform a “manual clean feed” procedure.
To solve this problem, you need to do some of the troubleshooting above to fix Brother Printer Error 35, and hopefully the error will be resolved. We hope to have helped you resolve this issue in a quick and easy way.
Do you need solution How do I reset a toner for Brother printers? this way.
Brother Printer Error 35 #Brother Printer Error 35 #Brother Printer Error 35 #Brother Printer Error 35 #Brother Printer Error 35 #Brother Printer Error 35 #Brother Printer Error 35 #Brother Printer Error 35 #Brother Printer Error 35
