Introduction How To Fix Unable to Print s35
Your printer is not printing your document because of the error “unable to print s35.” The reason behind this error is that your printer cannot communicate with your computer due to some issues like loose cable, disconnected cable, network client half printing and problems with your computer. Well, now we will discuss how to easily solve the Brother s35 printer error. Hope you choose the solution that suits you.
“Unable to print s35” on Brother Printer due to “unable to print s35” error. The reason behind this error is that your printer cannot communicate with your computer due to some issues like loose cable, dropped USB connection, etc.
In this article, I will help you with troubleshooting printer problems and fixing them. Therefore, without delay, let’s troubleshoot the s35 error message on the Brother Printer.
Whenever your printer starts showing an error message like “unable to print s35”, it can be very frustrating but we will try to troubleshoot this issue and fix brother printer issues step by step in this post.
Your printer is not printing your documents due to the error “unable to print s35.” The reason behind this error is that your printer cannot communicate with your computer because of some issues like loose , Follow the below steps:
Steps 1. First turn off the printer, and after few seconds turn on it.
- First turn off the printer, and after few seconds turn on it.
- Now go to control panel of your computer to open up printer properties window and then click “Printing Preferences”.
- Under this window, find Print Quality option and select Best quality print (Recommended) radio button from drop down list box next to it by clicking it once so that text written under this option changes from Draft Mode: On to Best Quality Print: On.
Step 2. Remove all papers from paper tray.
Remove all papers from paper tray. Open the front cover of your Brother Printer, then remove ink and toner cartridge, and disconnect any other cable. Reconnect them again carefully and close the cover of your printer again.
Step 3
Open the front cover of your Brother Printer, then remove ink and toner cartridge, and disconnect any other cable. Reconnect them again carefully and close the cover of your printer again.
Step 4
In case you are using a wired connection with your computer, just disconnect the USB cable, and reattach it again properly with your computer’s USB port.
In case you are using a wired connection with your computer, just disconnect the USB cable, and reattach it again properly with your computer’s USB port.
If you are using a wireless connection to print from your printer then don’t disconnect or remove the USB cable from your printer. You can also try switching off both of these devices for some time to see if this helps in fixing this issue on Brother printers.
Steps 5
You can check if this error has been fixed or not by printing a test page from your printer.
Verify that the printer is connected to the computer and powered on. If you used the Basic Mode (Step 1), go back to Advanced Mode in Brother Printer Toolbox and select “Install” again.
You can fix this error by Troubleshooting steps like reconnecting cables and removing papers from paper tray.
You can fix this error by Troubleshooting steps like reconnecting cables and removing papers from paper tray.
- Reconnect the cables
- Remove the unused paper from your printer’s paper tray
- Turn off the printer, wait 30 seconds, and then turn it back on again
- Try using a wired connection with your computer instead of a wireless one
Best Solution Fix Brother Printer Error E1?
Conclusion Fix Unable to Print s35
After doing all these steps, you can print a test page from your printer. If the error continues, then try the above steps Fix Unable to Print s35 again, but for the second time use a paper and check if you are able to print it without any issue.
Maybe You Need Solution: How to connect Brother HL-L2340DW printer to WiFi?
