Introduction Print Unable 52 Brother Printer
Print Unable 52 Brother Printer – If the Brother Printer drum unit and toner cartridge assembly is installed incorrectly, then this error will occur. Check to make sure that it’s installed correctly. If it is, you’ll need to reset the purge counter. A print unable 52 error occurs if your Brother Printer has a dirty toner or laser sensor. Make sure these parts are clean before continuing with troubleshooting tips below.
Check if the drum unit and toner cartridge assembly is installed correctly.
If you’re having trouble with your printer, the first thing to do is to check if the drum unit and toner cartridge assembly is installed correctly. Follow these steps:
- Check that the printer is turned on. If it isn’t, turn it on by pressing the power button.
- If your printer has a power button, press this button to turn it on. Otherwise, look for an icon that looks like a circle with an arrow pointing inwards towards another circle (often found next to your computer’s clock). Pressing this will turn on your Brother machine without having to use its traditional power button method—which can sometimes be more difficult for seniors or those who aren’t familiar using newer technology like tablets and smartphones as opposed to desktop computers with keyboards attached directly underneath them.”
- Check that the printer is connected to a power outlet. Make sure there’s no damage or defects in cables leading up into either side of your device; if so then consider purchasing new ones instead of trying repairing old ones yourself which could end up costing more money than just buying brand new ones off Amazon!”
Confirm that all of the protective materials have been removed from new drum unit and toner cartridge assembly.
Confirm that all of the protective materials have been removed from new drum unit and toner cartridge assembly.
Check that the drum unit and toner cartridge assembly is installed correctly. If an error continues to appear, reset the purge counter. It may be necessary to clean any dirty parts or replace them as necessary.
A print unable 52 Brother printer error occurs if the toner or laser sensor is dirty
If the print unable 52 error still appears, you can reset the purge counter.
If the print unable 52 error still appears, you can reset the purge counter.
- For a Brother printer:
- Press and hold the “Resume” button on your printer for 6 seconds until two beeps sound.
- Release the “Resume” button, then press it again to print a test page to make sure that your printer has been successfully reset
A print unable 52 Brother printer error occurs if the toner or laser sensor is dirty.
- What is a laser sensor?
A laser sensor is a small component that can be found in the toner cartridge assembly of your Brother printer. It’s responsible for sensing when the used toner level reaches 0% and will then inform the printer automatically to stop printing.
- How does it work?
The laser sensor works by emitting infrared light when there’s still some amount of toner left in your cartridge, which then reflects back through its photoelectric eye onto an array of photodiodes (which are semiconductor devices that are sensitive to light).
The photodiode works as a receiver and converts the reflected infrared light into electrical signals that are sent through wires into your computer where they can be processed by software running inside or on top of it; this process is similar with digital cameras except instead of capturing still images these cameras capture moving images at very high speeds — think 24 frames per second for example.
- How do I clean my Brother Laser Sensor? To clean out dust from inside this device, we recommend using compressed air since we’ve found out from experience that liquid cleaners tend not only cause damage but also leave behind residue which may affect print quality later on down the road after cleaning has been done properly.
This error occurs when you have an issue with your Brother Printer drum unit and toner cartridge assembly.
If you have a problem with the Brother Printer drum unit and toner cartridge assembly, then you might see this error. To solve this problem, first check if the drum unit and toner cartridge assembly is installed correctly. Make sure that all of the protective materials have been removed from new drum unit and toner cartridge assembly. Confirm that both parts are clean before installing them in your printer.
If you already tried these steps and still get an “Unable To Print” error message on your computer screen when trying to print something in your Brother printer.
Maybe You Need: What is clean 50 error in brother printers and how to solve it?
Conclusion Print Unable 52 Brother Printer
To solve the print unable 52 error, you should always first check the drum unit and toner cartridge assembly. If the problem persists, reset the purge counter to solve it.
Maybe you need: How To reset toner Brother printers?
unable 52 Brother Printer #unable 52 Brother Printer #unable 52 Brother Printer #unable 52 Brother Printer #unable 52 Brother Printer #unable 52 Brother Printer
